Bumper- Rear

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• 11-Gauge US Steel Construction
• Retain OEM Receiver Hitch And Wiring
• Pre-Cut Openings To Utilize Factory Sensors
• 100 Pct. Made In The USA

See All

• Smitty Bilt Apollo JL/JT Rear Bumper

See All

• Integrates The Existing Receiver Hitch
• Back Up Lights
• Back Up Sensor Holes
• Retains Receiver Hitch And Wiring Locations
• Pipe And Formed Treadplate
• Gloss Black Powder Coat

See All

• Combination Pipe And Tread Plate Construction
• Gloss Black Powder Coat
• Back Up Lights Included
• Pre-Drilled Sensor Holes
• Retains OEM Receiver Hitch And Wiring Locations
• MADE IN THE USA

See All

• Blind Spot Mounts
• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Two Cube Lights

See All

• Flat Black Powder Coat
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Paintable
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Integrated Steps On Either Side Of The Tailgate
• Durable Formed 3/16in. Steel Construction
• Retain OEM Receiver Hitch And Wiring Locations
• 3/4in. D-Ring Recovery Points
• 2 Stage Black Powder Coat

See All

• 3/16 in. Internal Structure Plating
• 1/8 in. External Steel Plating
• Reinforced Clevis Mounts
• Dimple Died Step Plates

See All

• Direct Fit
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings Welded On The Inside And Out
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Smittybilt Advantage Warranty

See All

• M1A2 Modular Rear Bumper For 14-18 Chevy Silverado

See All

• Hammer Black Powder Coat Finish
• 10 In. Single Row Light Bar Mounts
• Parking Sensor Cutouts

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Backup Sensor Cutouts
• Mounts For Cube Lights

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• Mounting Brackets Will Vary With Make/Model

See All

• Brushed Aluminum Skid Plate Included- Works with Factory Hitch
• Fully Welded 1-piece construction- 1.75 in. .095 Wall Tubing
• Pre-Runner Style
• 5 year Finish Warranty- Lifetime Workmanship Warranty

See All

• Aggressive Styling
• Integrated Tow Hooks And D-Ring Mounts
• Double Rung Side Step
• Fab Fours Signature Knife Edge Design
• Ease Of Installation
• Includes 16 Gauge Removable Skin
• Sensor Compatible
• 2 Integrated Pod Mounts For Reverse Lights
• Stainless Steel Hardware
• 2 Stage Matte Black Powder Coat
• 11 Gauge Steel Construction
• MADE IN THE USA

See All

• Direct Fit
• Dual Gloss Black Powdercoat Painted Finish
• Dense Zinc Treated Undercoating
• Expertly Robotically Welded
• Bumper Bolts Directly On To Vehicle
• 2 in. Receiver Hitch
• 5 Year Limited Warranty

See All

• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts

See All

• Maximize Performance On The Toughest Trails
• Multi-Faceted Bumper Design
• Plate Steel Bumper Construction
• Recessed Back-Up Lamps
• Integrated Hitch Receiver
• Rock Solid Mounting
• Recovery Shackle Tabs

See All

• Multi-Faceted Design
• Recessed Back-Up Lamps
• Works w/Existing Equipment
• Rock Solid Mounting

See All

• Raised corners for better entry and exit under the most extreme conditions
• Accommodates 3X3 Cube Led Lights
• Integrated 3/4 in. D-Ring Mounts
• Class Iii Receiver Hitch
• Integrated Jack Points
• Perfect Mid Width Design

See All

• Direct Fit
• E-Coat Undercoated With Dual Stage Textured Black Powder Coat
• Heavy-Duty 1/4 in. Steel Plate Design
• Three Point Mounting System Supports Over-Sized Tires
• Special Lock Design Keeps Tire Carrier Secure While Off-Roading
• 5 Year Limited Warranty

See All

• New solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
• Aux back up light cut out provided
• 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powder coat finish 5 year limited warranty
• Smittybilt limited lifetime warranty
• Modular design; tire carrier can be added in the future.
• Class III hitch for true towing with towable d-ring

See All

• Direct Fit
• Black Powder Coat
• Dense Zinc Treated Undercoating
• Two Stage Textured Black Powder Coat Finish
• Expertly Robotically Welded
• Bumpers Bolt Directly To Your Vehicle
• Bumper Is 2 in.X.120 in. Wall
• 2 in. Receiver Rated Class III 9;000 LBS.

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat finish With Satin Black Panels
• Mounts For Cube Lights

See All

• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Two Cube Lights
• Retains OEM Parking Sensors
• Retains OEM Tow Hitch And Trailer Plug
• Retains OEM Blind Spot Modules

See All

• Not Vehicle Specific
• 3mm Deep Drawn Formed Steel
• Winch Compatible Up To 12K
• Includes Modular Wings With Light Provisions
• Integrated D-Ring and Lift Points
• Oe Fog Light Provision
• Integrated Overrider With 13 in. Lightbar Provision

See All

• .120 in. Wall Steel Tube Construction
• Laser Cut Skid Plates/Tabs And Plates
• Direct Fit/No Cutting Or Welding Required
• Stainless Steel Hardware
• Designed To Work With Factory Tow Equipment

See All

• Fits up to 37 in. tires
• Class III tow rated
• New cam-style pin adjustment
• Easy 2 finger opening latch
• Double catch latch eliminates accidental opening
• MOLLE Pals compatible to allow multiple pouch mounting configurations
• Stainless steel pivot washer for longer wear life
• 3rd brake light bracket included
• integrated gas can and jack mounts

See All

• Bolt-on design for XRC GEN2 bumpers
• Frame pivot point for added strength
• Tuned one-handed opening operation; tuned to factory tailgate
• CB and jack mounts and Roto Pax® gas can holder
• Manufactured from 3/16 in. cold rolled steel
• Two-stage textured matte black finish

See All

• 18-Current Wrangler JL; 2-4 Door
• Adjustable Slant Tire Carrier
• Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
• Included Adjustable 3rd Brake Light Bracket
• Retains OE Camera Location And Functionality
• Removable Trail Jack And Aerial Antenna Mount
• Steel Vent Cover
• Roller Bearing Pivot
• Fits Up To 40 in. Tire; With Single-Action Open And Close Feature

See All

• Direct Fit
• 2 And 4-Door Models
• Two Stage Matte Black Textured Powder Coat Finish

See All